No, read the respective registers ( read the register TRM, Technical Reference Manual) -
but these registers GDI_O_IN are for connecting the GOO from output to inputs, it's not to read their value ?
I generate a signal from the digital blocs, and I want to read it without using interrupts, and without outputing it to an external pin
how to do that ?
Are you trying to read the port register, PRTxDR ?
Yes and no. as I said earlier, I know how to read PRTxDR by program
I would like to read the global Outbus Bus without having to route that bus to an output pin.
is this possible with a psoc1 ?
One way would place digital buffer, config it to interrupt, then route
the GOO buss to a GIE buss then to buffer. Use interrupt to indicate state