The explanation for the Timer in datasheet is :
Normal timer has a resolution of one second.
Fine timer can be configured in the device configuration to be as low as 12.5 milliseconds. Call
Then I use the timer is:
the fine_timer_interval in BLE_PROFILE_CFG is 5000;
void time_cb(UINT32 value)
void fint_time_cb(UINT32 value)
The Output timing of “t” and “f_t” is not：
“t” ：Output once every 1 seconds
“f_t” ：Output once every5 seconds
Please give me some tips!Thanks!