if you want to change the device-name which occurs in the device-manager you need to modify the description in the .inf-file of the device-driver you're using.
Rob, thanks for your reply. But I know the way that modify inf file which can change the device name after the driver installed. What I wanted is change device description when the hardware was found by OS before install the driver. I know it is ok in CY68013 sdk. How can I do this in CYUSB3014?
You have not increased the size of the descriptor from 0x08 to 0x0C. Note that after you have added A and B, there are 12 bytes now!
- Madhu Sudhan