so what should i do now for this this display if no component available in this ? is any possibilities to get that externally ?
so what should i do now for this this display(JHD12864E ) if no component available in this ? is any possibilities to get that externally ( ?
Only solution left is: reading datasheet and programming the interface yourself (or use a supported display)
Might turn out to be a bit of work, debugging facilities absolutely required, I don't know if your PCB supports this.
SparkFun’s FreeSoC2 board has two processors on-board: a CY8C5868LTI-LP039 and a CY8C5888AXI-LP096.
The former serves as a debugger/programmer for the latter, which is the target upon which your application code
will be installed.
You have debugging on your board.
If you go to github or element14 and do some searching on GLCD you might be
able to find a library you can modify. In fact there are several projects there using
GLCD and PSOC 4 that you could possibly adapt.
Plenty of code floating around that can deal with this type of display. You need to set up the parallel port and a few control type pins.
I have been using this project for the GLCD routines. All you have to do to adapt it is tell it how to draw a pixel to your display: