1 Reply Latest reply on Jul 20, 2015 8:52 AM by user_14586677

    RF Communication problem


      I have two boards with a Cypress PSoC 5 CY8C5868AXI-LP032 and a RF Transceiver AUREL VF 2.4 HP/V (that mount on board a Cypress CYRF6936)
      I'm developing my project with PSoC Creator 3.2, the project uses SPI protocol to communicate with the AUREL device, so I have a MASTER project that transmits continuously and a SLAVE project that receive the data.
      I'm using a library (Radio.h and RadioSPI.h) , I had to modify this library for that model of Aurel. Now I can transmit and receive 1 byte very fast, and it works fine.
      Now, I need to transmit and receive more than a byte, so I would to use the Burst Write Sequence and the Burst Read Sequence, I try to punctually respect all the datasheet rules and advices but everytime I use these Sequences I don't receive byte.
      Has someone got some experience with this devices and uses a Burst Read or Write sequence? Has someone got some advices for me?
      Thank you very much.