When you load the firmware using USB Boot (on FX3 DVK or your own board), do you see the same issue with the Flag? Or is it only with the SynC ADMux Boot?
- Madhu Sudhan
Hello Mr. Shudan,
Thanks for your reply.
Loading the Fimware using USB Boot on Fx3 DVK or my own board works well.
The problem appears only with Sync Admux. It seems that, after sending the firmware and fx3 starts the application, the communication between fx3 interface and fpga does not works.
BTW: the interface is designed as GPIF2 sync_SlaveFIFO.Has that any relevance with the boot mode used?
Can you help for this issue?Is there some sets to do in the application?
Please it is urgent!!
Thanks in advance.