These should help -
http://www.cypress.com/documentation/application-notes/an73854-psoc-3-psoc-4-and-psoc-5lp-introduction-bootloaders AN73503 PSoC® 3, PSoC 4, and PSoC 5LP Introduction To Bootloaders
http://www.cypress.com/documentation/application-notes/an68272-psoc-3-psoc-4-and-psoc-5lp-uart-bootloader AN68272 UART BL PSOC 3, 4, 5LP
http://www.cypress.com/documentation/application-notes/an60317-psoc-3-and-psoc-5lp-i2c-bootloader AN60317 I2C BL PSOC 3, 5LP
http://www.cypress.com/documentation/application-notes/an73503-usb-hid-bootloader-psoc-3-and-psoc-5lp AN73503 USB HID BL with GUI Host PSOC 3, 5LP
http://www.cypress.com/documentation/application-notes/an86526-psoc-4-i2c-bootloader AN86526 - PSoC® 4 I2C Bootloader
http://www.cypress.com/documentation/application-notes/an68272-psoc-3-psoc-4-and-psoc-5lp-uart-bootloader AN68272 - PSoC® 3, PSoC 4 and PSoC 5LP UART Bootloader
Thankyou Dana for your reply,
All the links shows me the right way but the problem is with the creator. I have creator 3.2. When i create a new project and want to select "Application Type " in advance settings. It is not visible in creator 3.2. This is what i also showed in my attachment.
Looking forward for your suggestion.
From 3.1 release notes -
Note Beginning with PSoC Creator 3.2, the “Application Type” option is removed from the New Project dialog box. PSoC
Creator automatically recognizes the application type from the TopDesign schematic. However, this update does not affect the
existing bootloader projects.
Basically placing the bootloadable or bootloader component on top schematic invokes
Thankyou once again for solving my problem :)
Glad to have assisted.