Welcome to the Forum!
For an example on how to use PSoC 4 BLE/PRoC BLE as Master, refer to example project at following location:
In case you want your Central device to connect to various kind of peripheral devices, then you do not need to explicitly mention a profile. Select the profile as Custom and do custom Service discovery in firmware.
Also,you can find the CySmart HEX file v 126.96.36.199 from following location (look under Related files section):
The link for source code of BLE Dongle CySmart 188.8.131.52.HEX in not working.
That is weird. The link is partial.
Anyway, please try this:
I could not find source code there. There is just hex file.
Could you please send the source code for me?
1 of 1 people found this helpful
Ahh, sorry. I though you are looking for the HEX file.
The CySmart Source code is part of the BLE Pioneer Kit installer. The link is same as my earlier post (http://www.cypress.com/documentation/development-kitsboards/cy8ckit-042-ble-bluetooth-low-energy-ble-pioneer-kit?source=search&keywords=CY8CKIT-042-ble ).
Look for the file 'CY8CKIT-042-BLE KIT ONLY PACKAGE' under Related Files section and download and install it. The CySmart example project, along with other example projects, should be at <installation_path>\Cypress\CY8CKIT-042-BLE Kit\1.0\Firmware\.