1 Reply Latest reply on Sep 20, 2015 12:31 PM by bmah

    Project#12-CentralPeripherial Uart not working

    robert.seczkowski

      Off the shelf example on PSOC42 and ble 042 kit. No modification.
       Debugging mode

         

      1. I'm able to receive data from psoc

         

      2. I detect with logic anaylser correct data stream into psoc (commands like 'c' etc)

         

      3. Psoc don't respond neither with error nor with any valid character

         

      Standard pinout is 1.5 tx 1.4 Rx