1 Reply Latest reply on Mar 26, 2014 10:06 PM by dmiya

    how to assign address of the app and boot when use jlink to download image to BCM9WCD1EVAL1

    chch_2120956

      Hardware:BCM9WCD1EVAL1

      MCU:STM32 F205RG

       

      I want to download image to STM32  F205RG internal flash(1MB).

       

      I assign the address of app boot dct download to flash and reset. the console only have a log (Starting Wiced v2.4.1)

                         

                          start address

      Boot : 0x08000000 (waf_bootloader-NoOS-NoNS-BCM943362WCD4-SDIO.bin )

      DCT1: 0x08004000 (DCT.bin )

      DCT2: 0x08008000 (DCT.bin )

      APP :   0x0800C000 (demo_appliance-BCM943362WCD4-FreeRTOS-LwIP.bin )

       

      Is this right? how to assign address?