I'm having an issue where the set clock on one of my 4245AXI in 44TQFP does not match the actual clock. When the system clock is set to 48MHz and a pin set to generate a 1MHz clock, the micro only generates a 290KHz clock. When the system clock is set to 14MHz, a 973KHz clock is generated and when system clock is set to 5MHz a 2.69MHz signal is generated. So it seems the internal main oscillator is stuck at 13.5MHz.
When I run the same code on another 4245AXI on cy8ckit dev board, it generates 1MHz no issue. So I believe the microcontroller hardware is faulty.
The problematic microcontoller is on a PCB I designed, I was wondering if this was a common issue?
Consider posting your project, makes life easier to troubleshoot.
“Create Workspace Bundle”