File a CASE unless someone else knows where to get it -
To create a technical or issue case at Cypress -
“Create a Case”
You have to be registered on Cypress web site first.
@dana : hi and thanks for peply.
I opened a support case and answer from Cypress in short: " sorry, no official support for EAGLE-CAD users". :-(
So i still hope that one CDC-user will show up, having the right package library for PSoC4M at hand and share with community.
TQFP64 is a new cypress package, so i can not modify existing CAD-device to fit my demands.
I've attached my library for Eagle. I am using Eagle 7.3 so I don't know if it will work in an older version of Eagle.
I use PSoC 4 and PRoC for my designs. Not all the layouts have been solder tested.
Just thought I'd add what devices/symbols are in this library:
KITPROG 5pin header
DualLED in 0805
The CYBLE-* are all SMT Modules which I love! I hand solder alot of things so I've made the SMT pads for the modules a bit longer so I can get an iron on them. Enjoy!
PatternAgents has developed an Eagle Cad Library for Cypress Semiconductor parts, as well as a Capacitance Sensing Widget Library for making your own Capacitive Control Surfaces. You can find it here :
Please use the comments section (on the github link above ) to request new parts and/or components.