I am using the Cypress PSoC BLE pioneer kit. I am trying to emulate the throughput example on project 24. I did not change the code downloaded from Github
I programmed the GATT Notifications Outgoing onto the PSoC board and programmed the GATT Notifications Incoming onto the USB Dongle.
I connected to both ports using Putty as per the settings mentioned in the accompanying pdf
Baud rate – 115200 bps, Data bits – 8, Stop bits – 1, Parity – None.
however I do not see any data on the terminal.
Am I missing anything ?
Please check the COM Port Settings in your device mnager and see if this matches with the settings on the Putty.
- Madhu Sudhan