6 Replies Latest reply on Oct 2, 2015 10:23 AM by dakn_263916

    Unable to synchronize clocks

    mrmac_286121

      I want to align two clocks running at 100KHz and 1MHz.

         

      1. I declared a Design wide cock running at 1MHz

         

      2. Then dragged and dropped two clock components in the top design.

         

      3. Configured the source of one clock from "EXISTING" 1MHz design wide clock and for the other I used a new divider but the same design wide clock running at 1MHz.

         

       

         

      The clock configured from "existing" design wide clock simply does not work.

         

      Please help