increasing single channel advertising frequency

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi,

   

It appears that advertisements cycle through the three channels at one message per advertising interval specified. So, if you disable two of the three advertising channels your advertising frequency is actually 3x the configured value. Is there a way to only advertise on one channel yet keep the configured rate?

   

Thanks,

   

Tom

0 Likes
1 Solution
Anonymous
Not applicable

If you enable all the three channels for advertisement, three advertising packets may be sent in an advertising event (one on each of the three enabled advertising channels). If you enable only one channel for advertisement, then the adv packet would be send once through that channel at the advertisement rate specified.

View solution in original post

0 Likes
2 Replies
Anonymous
Not applicable

If you enable all the three channels for advertisement, three advertising packets may be sent in an advertising event (one on each of the three enabled advertising channels). If you enable only one channel for advertisement, then the adv packet would be send once through that channel at the advertisement rate specified.

0 Likes
Anonymous
Not applicable

Thanks for the reply. It seems my scan window & interval aren't configured correctly to see all of the advertisements.

0 Likes