3 Replies Latest reply on Oct 31, 2015 11:35 AM by peter.sesztak_1509996

    AN75779: missing attached code files ?? how to download?

    peter.sesztak_1509996

      I read the AN75779: "How to Implement an Image Sensor Interface Using EZ-USB® FX3™ in a USB
      Video Class (UVC) Framework" pdf. The document mention there is a code attached (zip file) to this application note includes a file, GPIF II Designer/ImageSensorInterface.cydsn.

         

      I not able to find the attached file(s) (nothing else just the pdf file).

         

      I can't find the link on the Cypress web site.

         

      Please, help me where can I find the zip file contains the attached code source files ??

         

      Thanks in advance,

         

      Best Regards,

         

      Péter

        • 1. Re: AN75779: missing attached code files ?? how to download?
          Madhu Lakshmipathy

          Hi,

             

          Pleas find the files attached. We will fix the webpage ASAP.

             

          Regards,

             

          -Madhu Sudhan

          • 2. Re: AN75779: missing attached code files ?? how to download?
            peter.sesztak_1509996

            Dear Madhu Sudhan,

               

            thanks ! :)

               

            Best Regards,

               

            Péter Seszták

            • 3. Re: AN75779: missing attached code files ?? how to download?
              peter.sesztak_1509996

              Dear Madhu,

                 

              Which SDK version you is used for this sample ?

                 

              for your kind information: it is not buildable (automatically) with current SDK version:

                 

               

                 

              19:30:45 **** Incremental Build of configuration Debug for project USBVideoClass ****
              cs-make all 
              'Building target: cyfxuvc.elf'
              'Invoking: ARM Sourcery Windows GCC C Linker'
              arm-none-eabi-gcc  ./camera_ptzcontrol.o ./cyfx_gcc_startup.o ./cyfxtx.o ./cyfxuvcdscr.o ./sensor.o ./uvc.o    -T"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/firmware/common/fx3.ld" -nostartfiles -Wl,-Map,cyfxuvc.map -Wl,-d -Wl,--no-wchar-size-warning -Wl,--gc-sections -Wl,--entry,CyU3PFirmwareEntry "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\\firmware\u3p_firmware\lib\fx3_debug\cyfxapi.a" "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\\firmware\u3p_firmware\lib\fx3_debug\cyu3threadx.a" "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\\firmware\u3p_firmware\lib\fx3_debug\cyu3lpp.a"  "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\ARM GCC\\arm-none-eabi\lib\libc.a" "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\ARM GCC\\lib\gcc\arm-none-eabi\4.5.2\libgcc.a" -mcpu=arm926ej-s -mthumb-interwork -g3 -gdwarf-2 -o"cyfxuvc.elf"
              arm-none-eabi-gcc: error: C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\ARM GCC\\lib\gcc\arm-none-eabi\4.5.2\libgcc.a: No such file or directory
              cs-make: *** [cyfxuvc.elf] Error 1

                 

               

                 

              Sorry for my basic question: any hint how to change from V4.5.2 to V4.8.1? 

                 

               

                 

              Thanks in advance,

                 

              Best Regards,

                 

              Péter Seszták