5 Replies Latest reply on Dec 2, 2015 6:44 AM by molly@cmtelematics.com

    UART-USB example for CY8CKIT-049-42xx prototyping kit

    molly@cmtelematics.com

      Hello,

         

      I downloaded the USB-UART example project from 100 Projects in 100 Days, got it built and programmed my CY8CKIT-049-42xx board (using the guide that's attached). In the guide (section 5.4.2) it says when this example is running it should mirror any text I enter, so if I type "hello" it shows up as "hheelllloo", and it does, but for the original project in 100 Projects in 100 Days (http://www.element14.com/community/message/75846/l/psoc-4-pioneer-kit-community-project04--usb-uart-utility#75846) it  also says pressing the reset button (or presumably unplugging it and replugging it into my USB port) should display the string "CY8CKIT-042 USB-UART" in the window. On my board it does not. This is troubling to me because I'd like to be able to use this sort of code to write print statements to Putty for debugging purposes. Why does it not display that string?