Check for non-ascii characters in path or username, avoid files on network. Seems as if re-installation does not work?
Hi, I'm facing the same problem.
the early access Creator 3.3 SP1 is better. But still the system is not responding smoothly.
I uninstalled all PSOC SW and reinstalled, nothing changed.
Unfortunately reinstallation doesn't work. No files on the network. I will check the path and username but there was no problem in v3.2.
Still no improvements. Sometimes I get the following error when it slows down and the program crashes.
Problem Event Name: APPCRASH
Application Name: psoc_creator.exe
Application Version: 0.0.0.0
Application Timestamp: 55f3682d
Fault Module Name: libclang.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp 555cb825
Exception Code: c0000005
Exception Offset: 00021a27
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1055
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Get help from Cypress directly: At top of this page Design Support->Create Support Case and tell what you already have tried.
For those having performance issues, did you install from CD or directly download from the web?
I did what you said and I cannot see 3.3 installed.
Necdet and Metin,
So during the Creator install, the .Net Optimization Service (NGen) is supposed to run on all of the .Net assembles for Creator. There is a possibility that it did not run in your cases. If so, I can help you run the optimization tool by hand to see if that helps.
It turns out it is fairly easy to check for the Ngen assemblies. Open a console Window. (Hit the Start key and type cmd<enter> or hold shift, right click on a folder and select "Open command window here".) Enter the following:
%windir%\Microsoft.Net\Framework\v4.0.30319\ngen.exe display psoc_creator
You should see something like this:
If you don't see your 3.3 install listed, then please let me know. The .Net folder may be named differently, so the command may be different.
cmd.png 62.8 K
I am getting the error as
Error: The specified assembly is not installed
Please find the attachment.
I order to achieve the speed in PSoC Creator 3.3 I have reduced the animation of my PC.
I have windows configuration of
2.9GHz Intel Pentium (R) Processor
32-bit OS Win7
500GB Hard-drive where C-drive has 70GB free memory.
Untitled.png 114.8 K
Hey Guys , Good news.
After I got fed up of slow operation, I tried to un-Install the PSoC Creator 3.3, during initialization of Uninstalling process I tried to have a another shot by giving repair...
WOW... ITs perfectly working smooth with out any lag.
@ necdetalpmen_1437776 Try to give repair. I hope your problem will be solved.
I have a similar problem. PC_3.3 is very very slow.
I tried this command, but similar it has failed. Can i solve this problem? Please help me
Scott contacted me and we solved the problem. It was something about Turkish characters.
I'm living same problems. Computer is halting for a while on every modification or action.
I'm getting "Error: The specified assembly is not installed" message, when I try the "ngen" command.
(To Scott or anyone who knows solution): Please could you share solutions(s).
Especially about Turkish characters.