1 2 Previous Next 16 Replies Latest reply on Jan 13, 2016 9:55 AM by user_242978793

    BLE UART

    ville.tiensuu_1549261

      Hi, I am going through a BLE UART example project

         

      https://github.com/cypresssemiconductorco/PSoC-4-BLE/tree/master/100_Projects_in_100_Days/Day020_BLE_UART

         

      I compiled and programmed a central and peripheral sides and print message log from both devices is printing the Device role, low power mode and flow control information.

         

      But connection between the devices are not made.

         

      How should I start troubleshooting  this?

         

      I have tried to power the board at same time and pressed reset button after a while on both devices, simultaneously and separately.

        1 2 Previous Next