10 Replies Latest reply on Apr 6, 2016 6:02 AM by boyawang728_1596086

    BLE-UART Bridge: How to send continuous UART String?






      I am working with project 20 (BLE UART Bridge) of the 100 project in 100 days site, http://www.cypress.com/file/66366/download and having trouble sending a string over from the PSoC to the bluetooth dongle.




      I am using the CY8CKIT-042-BLE PSoC 4 kit. In terms of the bridge between the psoc and the dongle, that works fine. What I am trying to do is; after the psoc and dongle have connected, I want the PSoC to continuously send a string (UART String) to the bluetooth with 1 second delay, then a different string, then another 1 second delay. It would be similar to the classic blinking code, but with strings. When I view the Com port for the the dongle with a terminal program, it should just keep repeating the same received set of strings over and over. 




      I am really lost in here, What would i need to change in the main code of the psoc, to allow for a continuous string to be sent over the bluetooth after it has connected?