unknown devcie

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

when I inset mini prog into my design board. The psoc creator can not know the chip. my chip is cyble10563-56.

0 Likes
7 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You should update the miniprog3 firmware to latest revision.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

can you give me a new version link of mini prog 3?

   

what version is the lastet revision?

0 Likes
Anonymous
Not applicable
        can you give me a new version link of mini prog 3   
0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Connect MiniProg3 to your PC, start Cypress Programmer 3.24, select MiniProg3, go to Utilities and check for updates.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

it failed. it said  '                                                               | FAILED! FW Version is up-to-date. No need of Upgrade. Hex: 2.05 MiniProg3: 2.05

   

'

   

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

So the problem might be

   

The MiniProg3

   

Your board.

   

Can you

   
        
  • Check by connecting your MiniProg3 to a Cypress Kit (a -049 would be ok) to see if it is working
  •     
  • Post schematic of your board, so that we can check for correctness
  •    
   

 

   

Bob

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

it is my schematic.It worked when I only provided power by mini prog

   

but it dose not work when I provided power by my board.

0 Likes