There isn't just one but lot of code examples for verifying the each blocks of the Chip in PSoC Creators code example. Go to File -> Code Examples and select the Example for each block you need to verify.
Thanks.. I did manage to find, build and successfully upload firmware for the PRoC block mounted on my 043 kit. .. and it appears to work well.. so my soldering by hand worked.. at least well enough :)..
Now I need to figure out a good project using both blocks talking amongst themselves.. and the air..
Can you post the exact code example. I can't seem to get PSoC creator to recognize the PRoC on the 043 kit. thanks!!!
I used a project from the examples in the 100projects/100days..
Your issue sounds to me like you possibly have either not installed SW4 (see section 4.2.7 of the 043 kit user guide), or have not set it to the correct position to program the PRoC module... this is required for the programmer/creator to see it..
You were absolutely right! Got it working perfectly. Thanks so much.