Thanks. The problem is if I open the project and replace the chip with the one I am planing (CY8C4124LQI-443) I don't have the same components any more. The only choice I have is SPI SCB mode which has no pins.
Is this a conceptual limitation or a library bug?
How many pins does your device contain? Did you read the data sheet for the sbc-SPI component? The data sheet says the component has no physical pins.
I'll try your component in the program and see what happens.
I am trying to get the smallest footprint with ADC/DAC/SPI for 5/3.3V application. So it is 40QFN. Actually I solved the problem retargeting to CY8C4245. In this case I have access to pin configuration. Thanks for help.
The pins are hard wired internally - use the "Pins" entry to select physical pins
I have the same problem with the module CYBLE-224110-0.
Not all the pins of the SPI are routed to the PCB.
What can I do?