3 Replies Latest reply on Jan 24, 2016 4:34 PM by anpi_1343696

    Cannot compile CYBLE-014008-00 BLE with Capsense?


      Hi All,


      Any help would be appreciated.


      Problem 1.  I do not see the CapSense CSD component when configuring for a CYBLE-014008-00 BLE in Creator 3.3 CP1. The CSD CapSense component does not show up in the catalog. I temporarily switch to another device and I see the CapSense CSD in the catalog, so I drag it onto the Top Design. I then switch back to the CYBLE-014008-00 BLE as the  device. This is the only way I seem to be able to get a CSD CapSense component in my design.


      Problem 2. Now that I have a CSD component in the design, I configure 2 Buttons. But when I compile, I get several error messages:


      "Pin guidance unavailable: Resource limit: Maximum number of CapSense exceeded (max=0, needed=1)."


      "Pin guidance unavailable: Resource limit: Maximum number of Comparator exceeded (max=0, needed=1)."


      Problem 3: The CSD component requires a CMOD pin assignment. I don't see the CMOD pin assigned in the CYBLE-014008-00 BLE pinouts.


      Thanks in advance for your help.


      Attached is a copy of my archive.