2 Replies Latest reply on Feb 5, 2016 4:25 AM by herv.pipon




      I thought I succeed to finish my project which generates a calibrated pulse train;


      Unfortunately the pulse was not correct : It has to start on the rising edge of a clock a stay high during a fixed period.....

      • When done with Edge Detector it starts correctly but the width is not constant.
      • When done with Pulse Converter the width is correct but it doesn't start correctly.
      • When done with a Counter I got the following error : "Resource limit: Maximum number of Datapath Cells exceeded (max=4, needed=6)."

      Why is is not possible to have a simple monostable in the Component Catalog ?


      I though my project was so simple, I will have to do it by coding only...