1 Reply Latest reply on Jan 30, 2016 3:02 PM by user_1377889

    Pin confusion between datasheet and PSoC Creator

    joh_1498991

      Dear Cypress,

         

      In the documentation for the EZ-BLE PSoC Module (Document Number: 002-00023 Rev. *D Revised January 22, 2016) it says in table 4 on page 9 that:

         
            
      • pad 2 is port 1.1 
      •     
      • pad 3 is port 1.0
      •    
         

      However, in PSoC Creator (3.3 CP1) it says the opposite:  

         
            
      • pad 2 is port 1.0 
      •     
      • pad 3 is port 1.1
      •    
         

      Who is right, the data sheet or PSoC Creator?

         

      Kind regards
      John Hansen