8 Replies Latest reply on Oct 27, 2017 11:26 PM by user_418894472

    Undocumented features of Kitprog in CY8CKIT-059

    user_11721473

      According to manual, maximun UART to USB bridge speed is 115200 baud. But in fact it works at much higher bauds. The trick is that you need to setup custom speed on the other side. Most drivers and terminal emulators allow this. On the Kitprog side you tune it as usual to 230000 or 460800. For the experiments I used Moxa Pcomm Terminal emulator and ordinary FTDI FT232RL converter. I discovered that Kitprog UART to USB bridge definetelly works in the ranges 245000-265000 and 475000-525000 baud. At the moment I created a case and maybe Cypress gurus find the solution to return these ranges to normal values 230400 and 460800.