2 Replies Latest reply on Mar 1, 2016 9:15 AM by haimcohen777_1572941

    Device Dscriptor - HID Report

    haimcohen777_1572941

      Hello,

         

      I'm a newbie with a CY8CKIT-059. Trying for the first time to establish a USB link to a PC, an interrupt transfer type, I've stucked right at the beginning while configuring Interface descriptor/HID Class attributes: HID report has none string suggested. I was expecting InterruptHIDReport. I can't type it. Applying the configuration produces an error:

         

      Invalid Parameter: Error 1: Undefined HID Report for the HID Class Descriptor. To fix this problem you can: (1) Configure the HID Class Descriptor to refer to a HID Report, or (2) Remove the HID Class Descriptor from the Configuration

         

      Please advice.

         

      Thanks,

         

      Haim