- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello! I'm new to the Psoc platform.
I wanted to test the DALI example here ( http://www.cypress.com/design-guides/cy8cled0xx0x-powerpsoc-firmware-design-guidelines-lighting-cont... )
using my Psoc4 KIT.
Is there any easy way to port that example from Psoc Designer to Psoc Creator?
Thank you!
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Welcome in the forum, Marcelo!
The PowerPSoC chips have nothing comparable in the PSoC4 world. So the transfer from one to the other might fail.
What exactly do you want to perform?
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Welcome in the forum, Marcelo!
The PowerPSoC chips have nothing comparable in the PSoC4 world. So the transfer from one to the other might fail.
What exactly do you want to perform?
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, Bob!
I just want to get DALI and DMX512 example working on my PSOC4 kit.
I'm currently using Atmel in one of our products but i want to switch to Cypress, i found the examples here:
and i just want to have the less amount of work to get them working on the Psoc4 Kit, i don;t have time to read all the code and figure out how to transfer.
Thank you!