i am using CYBLE-022001 and facing problem with phase shift between line and line_n signal .. click on below link --
it is possible to change 180 degree phase shift with 50% duty cycle between line and line_n by invert function (A ,B).. but whenever i changed the duty cycle like 30% its give me 30% DT on line and 70% DT on line_n (C,D).. which is wrong
How it is possible to change 180 degree phase shift with 30 % Duty Cycle .......(F)
line_n output is the inversion (configurable to invert it or not) of line output of PWM. So, its not possible to configure phase shift between line and line_n.