4 Replies Latest reply on May 10, 2016 12:16 AM by helic_263931

    disconnecting every 30 seconds

      I have a simple BLE and accelerometer design with one service, and one characteristic.  The BLE profile is custom, but the application is based off the capsense example.  The client connects to GATT and enables notifications on the characteristic.  The client then starts receiving correct notifications from the PSoC 4.  The problem is that the client receives a disconnect after exactly 30 seconds.  We've programmed the client to reconnect, which works just fine.  But it always gets a disconnect after exactly 30 seconds.  We don't do any reads or writes on the characteristic.  I've tried modifying the various relevant parameters in the BLE configuration in PSoC Creator 3.3.




      Any ideas on why we're disconnecting after 30 seconds?