1 Reply Latest reply on May 3, 2016 1:40 AM by samp

    AGND CONNECTION

    chiragmodesara_1567941

      My ADC is in ASC10 block and my RefMux is ACB00. i set RefMux to the AGND.

         

      now i want to connect and discount AGND to the ADC input with API.

         

      how can i do it??

        • 1. Re: AGND CONNECTION
          samp

          Assuming you are using the incremental ADC, you can connect the ADC input to RefMux at ACB00 by means of the following register write:

             

          ASC10CR1 &= 0b00011111;

             

          You can refer to this register on page 194 in the PSoC1 Technical Reference manual or do a search for ASCxxCR1.