PSOC 4 CY8CKIT-042 Issue with UART DEBUG Port

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I am working with CY8KIT-042 with PSOC 4 PSOC 4200 BLE, recently the DEBUG port is stopped working and its not detected by the device manager. When I plugin the hardware, I can see only KitProg is detected on the device manager. On PSoC Creator, I am not able to see any devices available for program the hardware.

   

I tried reinstalling the software, installing the USB DEBUG SDK, cypress drivers. Still the problem continues.

   

Any idea to solve this problem? Thanks in advance.

0 Likes
1 Solution
Anonymous
Not applicable

I have booted the device in the mass storage mode, by long pressing the RESET button device came back to DEBUG mode. Device works fine now.Thanks for the reply.

View solution in original post

0 Likes
2 Replies
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

Did you update Psoc Creator if so you may need to reinstall the windows drivers. Also after the install you can find the driver in programs_x86 under the C: dir.

0 Likes
Anonymous
Not applicable

I have booted the device in the mass storage mode, by long pressing the RESET button device came back to DEBUG mode. Device works fine now.Thanks for the reply.

0 Likes