2 Replies Latest reply on May 8, 2016 10:41 AM by dimitar.krastev

    PSoC4 CapSense tuner with KitProg

    dimitar.krastev

      Hello ,

         

       

         

      I have problem using KitProg and PSoC4 CapSense tuner - from beginning, tuner starts, after 30 sec appear error  time out.

         

      when look on pkts/s i have 70-80 and drop down to 0, and error message appear.

         

      I using KitProg, example project from library, PSoC Creator 3.3 SP1 with CP2, Win10 64bit. KitProg is attached to CY8CKIT-049-42XX

         

      Any idea is appreciated - i spend 2 days digging and noting!

         

      Try to connect MiniProg3 - same result.