2 Replies Latest reply on May 26, 2016 4:18 AM by jerry.merrill

    FX3 GPIF II clock accuracy, jitter specs

    jerry.merrill

      I am considering using the GPIF II clock output as my board's primary clock (as well as GPIF I/F clock).  The board requires that the clock have 10ppm accuracy and a specified maximum jitter.

         

      1. If I supply a 10 ppm clock to the FX3, will that accuracy be reflected in the GPIF II clock output?
      2. Does anyone know where I can find jitter specs for the 100MHz GPIF II clock sourced from the internal PLL?

         

      thanks, Jerry