3 Replies Latest reply on Jun 1, 2016 6:04 AM by user_1377889

    USB .NET Driver for PSoC 5LP

    max.henzi

      Hello,

         

      Is there a .NET driver available from Cypress that supports the PSoC 5LP family?

         

      Thanks

        • 1. Re: USB .NET Driver for PSoC 5LP
          user_1377889

          What needs a PSoC5 a .NET driver for?

             

           

             

          Bob

          • 2. Re: USB .NET Driver for PSoC 5LP
            max.henzi

            My PSoC5 design controls several other I2C devices. Each of these devices can of course be configured using PSoC Creator.

               

            However, I would like to be able to give my end user the flexibility to change the configuration of the device. As a result, I would like to write a software application that allows my end users to make these changes. Cypress has .NET drivers for their standalone USB controllers. This makes writing applications to control hardware over USB very convenient. However, the existing drivers do not seem to support the USB solution implemented in PSoC5.

            • 3. Re: USB .NET Driver for PSoC 5LP
              user_1377889

              There is an USBUART component which uses on PC side an emulated com-port and on PSoC5 side the USB interface. This should be sufficient to make small adjustments as address changes etc. to the PSoC.

                 

              When in need for more, as completely re-programming the device, you may use a bootloader.

                 

               

                 

              Bob