I have the PSoC 4 BLE Pioneer kit and have supplemented the ADC example code with authenticated encryption BLE code. My peripheral device is called "Shelf sensor" However, I don't think I have done this correctly because after running CySmart on multiple Android devices, the "Shelf Sensor" only appears on the Nexus 9 and not the two phones. Other PSoC examples show up in CySmart on all three Android devices. So something I did makes the PSoC only appear on the Nexus 9. What could I have done to cause this problem?
I do have pairing enabled, but not the private addresses. The peripheral always has the same address. I did not start from the "Privacy" example.
Post your code so we can check it!!