4 Replies Latest reply on Jul 21, 2016 5:23 AM by linusti

    FX3 : only USB2.0

    eandre_1663191

      Hi,

         

      I'm trying to design a custom board using FX3 peripheral. I will connect my board to USB2.0 hosts only so I don't need to use the USB3.0-related wires. I chose the FX3 over FX2LP because of its better specs. My question is : do I need to connect the USB3.0-related wires or can I  get rid of them ? Depending on the answer, my design would be pretty different (different connectors & different routing). I think I would get better results with less EMI if there's no USB3.0...

         

      Thanks for the replies :)