5 Replies Latest reply on Jul 9, 2016 2:25 AM by user_1377889

    CRC 2.4  component

    user_301665782

      Hi everyone !

         

      I cannot get working the CRC  component.

         

      I have a workspace with three project in there.

         

      One project is CRC only.

         

      The other two ones are Infrared  Emitter and Receiver, each one with its CRC component.

         

      The setting for the three CRC is a same and I am getting three different CRC values when I am shifting serially the same 16 bit word

         

      ( I repeat with the same CRC component setting).

         

      The word shifting is done similar to the CRC example, with Control Registers ( Enable, Data, but clock is a clock component.)

         

      Each CRC  has  12 MHZ clock component attached.

         

      My be I am wrong with something.

         

       

         

      Thank you for any help.