2 Replies Latest reply on May 2, 2018 2:53 AM by xiwu_2656166

    CX3 UVC Name change

      In FW I would like to change the UVC device name.


      (EX. name1, name2, name3....name10)
      Who do you know how?

        • 1. Re: CX3 UVC Name change

          Please check the example project in Fx3 SDK in "C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\cx3_examples\cycx3_uvc_ov5640"


          In this example you can find that the name of the device is "CX3-UVC". This is specified in the "uint8_t CyCx3USBProductDscr" array in the cycx3_uvcdscr.c file.


          you cna specify your own name in that array. Also, please specify the size of the name you have entered in then " /* Descriptor Size */" field of the array (first byte of the array)




          - Madhu Sudhan

          • 2. Re: CX3 UVC Name change

            Hi, I changed it according to your method but it's still ”eocon's CX3 RDK with ov5640” .

                                                                                 WUcon's CX3 RDK with ov5640”

            /* Standard product string descriptor */

            const uint8_t esUVCUSBProductDscr[] =


              0x38,                           /* Descriptor Size */

              CY_U3P_USB_STRING_DESCR,        /* Device descriptor type */

              'W',0x00,  //

              'U',0x00, //






              ' ',0x00,




              ' ',0x00,




              ' ',0x00,





              ' ',0x00,