1 Reply Latest reply on Jul 24, 2016 3:04 PM by madhul_36

    Bonded devices and temporary whitelist-only broadcasting

      I'm designing an app that connects to a sole Bonded device and while connected will broadcast a non-connectable, whitelist-only advertisement to up to 8 different devices.


       Is the Bonded device stored in the same maximum-8 array, so that I would have to remove the bonded device address before populating the whitelist address?  


      If so, after removing the bonded address, populating the whitelist, advertising, and clearing the whitelist, how would I add the bonded device back to the bonded list for future connecting would StoreBondedDevices still apply and would/could I call it during connection or after disconnect?


      I'm using component 3.10 and noticed in the docs that CyBle_GapRemoveDeviceFromWhiteList removes all devices, bonded and whitelist, but a parameter to allow them to be removed separately isn't available with this version.  Is it a future release, or is it dependent on chip?




      Thank you.