Thank you for the answer. I know that the EZ-BLE module has less pins, but they are sufficient for the application. What would I need to change in the application in the PSoC Creator?
I don't have your program so I can't determine all of the issues. But the first thing is to click on The Project Tab and select the device selector and select the device on your module and then PSOC Creator will flag the changes you need to make in your program. You will also need to rebuild the program and see if it flags anything.
If you are trying to get the demo that controls the RGB LED Color ,
1. PRISM Module is not supported
2. The RED LED is of the RGB is not connected.
I would just like a blink the LED demo.