2 Replies Latest reply on Aug 16, 2016 7:29 AM by yauping_18_1650636

    *Project Example: problem on disabling low power mode

    yauping_18_1650636

      Hi, I'm testing the PSoC4 BLE Capsense Proximity from the project example. Everything work fine so far, but when I tried to disable the LOW_POWER_MODE the server(PSoC4 module) become unable to notify the client(BLE dongle). And i found out the main cause is due to the following condition statement:

                      if(CYBLE_BLESS_STATE_ECO_STABLE == CyBle_GetBleSsState())
                      {                    
                          HandleCapSenseProximity();
                      }

         

       

         

      The BLE subsystem cannot enter ECO_STABLE state. I have tried changing the "CYBLE_BLESS_STATE_ECO_STABLE" to any possible state but there is still no result. In this case, what should i do in order for the program to work properly without going into low power mode?

         

      Additional question: Can the BLE remains in ACTIVE state for all the time Or it must enter Sleep mode once a while for proper operation?(Neglecting the power consumption factor)