1 Reply Latest reply on Aug 18, 2017 1:10 PM by j.colmen_1542866

    How to het 0-5V analog output?

    j.colmen_1542866


      We are using a PSOC 4 CY8C42478ZI-MF485 and we need to generate an analog output voltage from 0 to 5 volts to control a motor controller. We are using the IDAC with a range of 0-612uA and externally we have a 10k resistor to have the voltage. However, the maximum voltage output we got was 4.3 volts. Thank you