1 Reply Latest reply on Sep 26, 2016 5:59 PM by AlbertB_56

    Serial flash is not retaining the previous data if we power OFF and ON

      we are working with S25FL132K SPI based NOR flash which we interfaced with LPC1778 uC. Previously it was worked but what was happened we don't know, now it is not retaining the previously saved data, when we remove the power supply. During the power supply ON serial flash writing and reading was working.




      when we remove the power supply previously written data was replacing with SFDP registers data.i.e When we give command 0x03 continous read command and from address we are getting SFDP register data.