10 Replies Latest reply on Sep 22, 2016 12:54 PM by user_1377889

    issues  configuring analog test pins for Analog compoent

    prabhu05fe_1711731

      Hello Everyone, 

         

       

         

      I have been working on PSOC 3  for a while right now  my issue is 

         

      providing an analog input (from the Electric counter machine) to the PSOC 3 pin (GPIO) and it is working fine with the proper function

         

      but i would like to check the type of waveform present at the analog input pin using oscilloscope

         

      so i connected one analog Test pin at the same gpio input pin of the PSOC 3

         

      whereas the problem is whenever i connect the probe at the test pin PSOC  it is not functioning But  if i remove the probe from the test pin PSOC is functioning well

         

       

         

      could anyone please tell me what could be the issue behind this problem i was not able to find the real cause of this problem any ideas or help would be really helpful for me

         

       

         

      Thank you

         

      prabhu