Please add cyBle_discoveryInfo.discProcedure=CYBLE_GAPC_OBSER_PROCEDURE; in the CYBLE_EVT_STACK_ON event of Central project before start discovery.
Can you test the project with the above mentioned modification and let me know if still the problem exists.
Thanks & Regards,
Some questions what does the Uart terminal screen show. Are you doing a C and the device number to reconnect? Also are you using the Dongle or just Ble modules CYBLE-222014?
Solved the problem.
I have another question,
Why CYBLE-222014 disconnects current slave when I connects to new slave in given example.?
Is CYBLE-222014 not supporting 8 slave connections as other BLE devices?
Would you suggest any alternate series of Cypress BLE module that supports 8 slave connection as mentioned above?