3 Replies Latest reply on Nov 11, 2016 12:59 AM by AnkitaS_51

    JTAG/Silicon ID reference file


      Hi All


      As a result of not always working in the Creator IDE, say Droidedit while on the road, the CYDEV_CHIP_JTAG_ID is not always accessible in cyfitter.h


      Is there a reference or include file with all PSoC parts and corresponding CYDEV_CHIP_JTAG_ID's?


      Many Thanks

        • 1. Re: JTAG/Silicon ID reference file

          Hi Greg,


          Please find it here: C:\Program Files (x86)\Cypress\Programmer\Devices




          JOBIN GT

          • 2. Re: JTAG/Silicon ID reference file

            Hi Jobin


            Thanks for the details. Would you know if the second JTAG id listed in the xxxx.dat files should be used / is needed for compiler directives such as CYDEV_CHIP_JTAG_ID?


            #if (CYDEV_CHIP_JTAG_ID == 0x4C81193)
                // My code


            For example in CY8C4xxx.dat the following line has two entries:


            2,CY8C4245AXI-483, CY8C4245AXI-483, 44, 32768, 3, 04_C8_11_93, 04_C8_12_93, v33


            PSoC Creator recognises the first entry when creating a project with the above PSoC device.


            My aim is to create a header file similar to the attached, to reference the PSoC4 family.


            Many thanks



            • 3. Re: JTAG/Silicon ID reference file

              Check the first two bytes i.e.04_C8 and mask the remaining one's.


              The first two bytes corresponds to the Silicon ID ,third byte corresponds to silicon revision. 

              1 of 1 people found this helpful