5 Replies Latest reply on Oct 31, 2016 4:05 AM by JoMe_264151




      I am trying to configure an I2C on the baseboard (CY8CKIT-042 -BLE) and need to check that on LCD.I am using CY8C4247LQI-BL483 which is an example code from the PSoC 4.


      LCD simulation is not working on I2C " Can you provide some steps for this "


      The below attached is the code and I have read the datasheet regarding the example program and when  I tried doing it with the SW2 which is on the baseboard,but it also didn't work.If I have to configure the switch SW2 from software only how we have to do that ? Can I know where I am missing.