2 Replies Latest reply on Nov 3, 2016 4:02 AM by hegac_1629436

    Problems with Hardware Connection - PSoC 4 Pioneer Kit



      I'm starting with the Pioneer Kit and want to use an easy HW-Connection to link the switch (P0_7) with the input of a counter to count down 3 button presses to switch on the red LED (P3_4).


      Unfortunately i get an error when i check the HW connection on the digital input pin with the Drive Mode "Resistive pull up".


      This is the error message:


      Pin 0: Use of drive modes which are not High Impedance with a hardware-routed input requires a port adapter, but the selected device does not have one.


      Can somebody explain, which is the meaning of this message?